I tidied my Yaris alloys this spring. Lots of scuffs and paint lifting (a common issue for a 53 plate Yaris)
. I used my mini high speed dremel clone to remove the worst of the bubbles , used normal high build filler to fill the holes, wet and dry paper to sand off and a large tin of spray aluminium paint and a small tin of spray lacquer to finish off. (local motor store)
Made a mask for each wheel from newspaper and masking tape.
Elapsed time per wheel : about 4 hours. Actual working time 30 minutes. Rest of time drying water or paint.
Result: from 1 metre away look nearly new. On close inspection you can see it has been filled but unless you are very picky it's great...
Total cost about £12- I had the filler and masking tape already.
Last edited by: madf on Fri 25 Jun 10 at 09:27
|