Technical Car/Motor Issues > Hyundai i10 - 12 1.0 Brake master cylinder problem
Thread Author: percy Replies: 9
View Flat 

 Wed 20 Feb 19 21:49 
 Hyundai i10 - 12 1.0 Brake master cylinder problem - slowdown avenue
I also replaced mc from a breaker , I used the original cap to fit with my pressure bleeder , with success. but still had sticking brakes. after replacing hose it was fine. to any body coming here in years to come.i would suggest bleed and rebleed the brakes before opening the hydraulics, take a good look at the pad wear too
<< Prev |
Reply to this message | Report message
       
 Messages Author Date
 Hyundai i10 - 12 1.0 Brake master cylinde..  percy 15 Feb 19 14:41
 Hyundai i10 - 12 1.0 Brake master cylind..  carmalade 15 Feb 19 15:23
 Hyundai i10 - 12 1.0 Brake master cylin..  percy 15 Feb 19 16:47
 Hyundai i10 - 12 1.0 Brake master cyli..  carmalade 15 Feb 19 18:08
 Hyundai i10 - 12 1.0 Brake master cyli..  VxFan 16 Feb 19 20:05
 Hyundai i10 - 12 1.0 Brake master cylind..  slowdown avenue 15 Feb 19 20:47
 Hyundai i10 - 12 1.0 Brake master cylin..  percy 16 Feb 19 15:39
 Hyundai i10 - 12 1.0 Brake master cyli..  slowdown avenue 16 Feb 19 18:44
 Hyundai i10 - 12 1.0 Brake master cyl..  percy 20 Feb 19 19:15
 Hyundai i10 - 12 1.0 Brake maste..  slowdown avenue 20 Feb 19 21:49
Latest Forum Posts