Ive never really bothered looking deep into dashcams but am well aware that they can be really useful in the right circumstances. The latest trend is to exploit a simple driving mistake by accelerating into a developing situation and then swear loudly and excessive blowing of the horn for Youtube content.
Anyway both Mrs and Junior FC have the the budget Nextbase 320XRs fitted to their cars.
Now that Junior is changing her car she gave me several hours advance notice reminding me the hers would need removing :/
They were fitted by that well known motoring emporium so I had little idea as to wiring routing etc.
Never the less 30 mins saw the system removed. I was impressed in that basically door seals were pulled forward and the wire, where necessary , just run in the void behind the seals then pushed behind the edges of plastic trims and headlinings. Simple. Now commenced reinstaling the wiring into the new Stonic. Replacement sticky pads arrive next day via Prime. Removing the older adhesive was a bit laborious but fortunately I spotted some 'that'll come in handy' adhesive remover down Man Aisle last week.
I had the first opportunity to actually play with the camera. Budget in that there is no BT or WiFI to assist in transfer of clips with SD card removal and attachment to a computer being the only option. I also noted that trying to update firmware or image management required a Nextbase programme to be downloaded but whilst I found the correct help page for the model of Dashcam and suggesting downloading the Nextbase program there was no actual button to facilitate the download. All spares including sticky pads showed 'not available' on every single item in their on line shop. And that applied to other models as well.
Last edited by: Fullchat on Thu 3 Sep 26 at 17:54
|